Wiki / Equipment

Precision Cutter

A fine white beam that cuts wrecks apart while barely harming the parts inside.

Mount
S tool
Price
2,200 cr
Wreck cutting
45 work/s
Rock cutting
8 work/s
Reach
38 m

A salvage tool, not a mining one. Its hair-fine white beam runs between two guide rails that meet at the cut.

Using it

Press 2 to select it and hold the left mouse button. It is its own tool group, so a ship can carry mining lasers and a cutter and switch between them.

On wrecks

It cuts hull plating at 45 work a second, faster than the Light Mining Laser. Every beam wears down a recoverable part it touches; this one wears it 1% a second, against 2.5% for a mining laser. Recovered parts sell by their condition, so the cutter pays where the parts are worth more than the scrap.

On rock

Poor: 8 work a second, and full speed only on ordinary rock. On ships it does almost nothing.

Where it fits

Any tool mount, so every working hull from the Starter Tug up. The Wayfarer comes with one beside its Heavy laser.

Levels

Each level adds 10% wreck cutting and 4% reach, and takes a little off the wear. At Level 10 it cuts 86 work a second, reaches 52 m and wears a part 0.6% a second. Its rock cutting stays at 8. Level 2 costs 95 cr; all nine levels cost 5,680 cr.

Updated